Omer – Scissor free gap KAR 250

Electro-hydraulic pantograph lift with vertical raising, free of interference on the floor, ideal for the maintenance and lifting of lorries, trucks and vehicles of big capacity.

The lift is already according to the updating of august 2010 of the european norm EN 1493

Standard platform lenght: 9.000 mm, 10.000 mm, 11.000 mm; upon request customizable lenght (min. 6.000
mm and max 15.000 mm).


– Available for Surface Mount or Flush Mount installation
– Available also in the mechanical version
– Available also in the Twin Version, where the lift can work individually or, when necessary, also simultaneously and automatically syncronized.


•Lift Capacity: 25.000 kg
• Collapsed Height = 360 mm
• Runway Length: from 7.000 mm up to 15.000 mm
• Platform width = 760 mm
• Maximum height = 2.020 mm
• Electronic balance system with automatic leveling
• The runway has been designed to be used with the lifting traverse T5 and T7 with upper and lower sliding

Safety devices:

• Mechanical locks on each lifting cylinder • Burst valve on each lifting slave cylinder
• Qty 5 max. overpressure valves • Photo sensors for runways leveling control
• Acoustic warning and by-pass key when lift reaches 500 mm. from collapsed position
• Low voltage commands • Dead man control


• Traverse kit
• Light kit
• Embossed anti-slip finishing on all platforms surface: maximum safety for all lifting/ lowering operations
•Automatic pit cover plates for the flush Mount installation
•Extra longer ramps for Buses till 3.500 mm for the Surface Mount installation

Manufacturer’s website : Omer

Product website : Omer-Kar250

Product PDF : Omer-Kar250