Powder coating booths Eurotherm

Eurotherm powder coating booths

Eurotherm powder coating booths are designed to apply powder paint in a clean, controlled environment adapted to industrial requirements. They allow metal parts to be powder coated with consistent quality while limiting powder dispersion in the workshop.

A solution designed for powder coating application

Powder coating is used in many industrial environments to obtain a resistant, clean and durable finish. The powder is applied to the part, then polymerised in a high-temperature oven to form a solid coating.

Eurotherm booths provide a dedicated working area with extraction, filtration and powder recovery depending on the selected configuration.

The advantages of powder coating

Powder coating offers several advantages compared with other finishing processes. It does not require solvents, reduces waste and allows part of the sprayed powder to be recovered depending on the installation.

Main advantages:

• Reduced costs linked to powder waste

• Lower environmental impact thanks to the absence of solvent emissions

• Possibility to recover and reuse sprayed powder

• Simpler manual application than certain liquid paints

• High productivity depending on the booth configuration

• Solution adapted to industrial parts and repetitive production

Booths designed around your needs

Eurotherm powder coating booths can be designed to measure according to part dimensions, production type, available space and the desired level of automation.

They can be used in manual, semi-automatic or automatic installations, with possible integration into a complete surface treatment line.

Available configurations:

• Extraction wall for manual application

• Horizontal flow powder coating booth

• Vertical flow powder coating booth

• Automatic powder coating booth

• Automatic powder recovery system

• External filtration unit depending on requirements

Extraction walls for powder coating

Extraction walls capture powder-laden air during application. The air is extracted and then filtered through dust retention cartridges.

A pneumatic cleaning system regularly injects compressed air in reverse pressure into the cartridges to limit clogging and maintain filtration efficiency.

The recovered powder can then be disposed of or reused depending on production requirements and colour changes.

Key benefits:

• Extraction of powder-laden air

• Filtration through cartridges adapted to paint dust

• Pneumatic cartridge cleaning

• Dust recovery in dedicated drawers

• Solution adapted to manual applications

Custom powder coating booths

Eurotherm powder coating booths can be built with painted pre-insulated wall and roof panels. The panels are supported by a modular metal structure to adapt to space and size constraints.

Recessed LED lighting, acoustic insulation and internal ventilation contribute to operator working quality and to the final result.

Possible elements:

• Pre-insulated wall and roof panels

• Modular structure adapted to project dimensions

• Integrated LED lighting

• Booth acoustic insulation

• Ventilation designed according to the parts to be treated

• Control of filter cartridge efficiency

Horizontal flow powder coating booths

The horizontal flow powder coating booth is a simple and efficient solution for manual powder paint application. Air is drawn from the front opening of the booth towards the extraction wall located at the rear.

This configuration offers a good balance between investment, work safety and application quality. It is suitable for workshops looking for a flexible solution for parts of various sizes.

Advantages:

• Simple solution for manual application

• Good value for money

• Extraction through the rear wall of the booth

• Cleaner and safer working environment

• Adapted to flexible production

Vertical flow powder coating booths

Vertical flow booths are intended for installations requiring a higher level of control. Air enters through a filtered ceiling, crosses the working area more evenly, then is extracted through the floor via hoppers connected to an external filtration unit.

This airflow helps provide stable working conditions and better application quality compared with a horizontal flow booth.

Features:

• Filtered vertical airflow

• Closed booth with entry door

• Filtered ceiling for air intake

• Grated floor

• Floor extraction through hoppers

• Connection to an external filtration unit

Automatic powder coating booths

Automatic powder coating booths meet the needs of companies that need to process many batches of small or medium-sized parts with a high production rate.

They can be integrated into partially or fully automatic installations while maintaining a certain level of flexibility. They are generally combined with automatic guns, reciprocators and an automatic part detection system.

Key benefits:

• Adapted to high production rates

• Automatic powder paint application

• Automatic part detection

• Gun stroke adjustment according to detected parts

• Possibility of manual touch-up stations

• Integration into a semi-automatic or automatic line

Automatic powder recovery

An automatic recovery system can be added between the booth and the external filtration unit. It can include a cyclone connected to a colour centre to recover and reuse powder.

This system is suitable for automatic booths when large batches of parts must be processed in the same colour. The powder is separated from impurities, filtered and then sent back to the colour centre for reuse.

Advantages:

• Recovery of sprayed powder

• Separation of impurities

• Fast reuse of recovered powder

• Solution adapted to large batches in the same colour

• Reduction of material losses

External filtration unit

The external filtration unit allows the extraction system, filter cartridges, pressure cleaning system and fan to be installed in a separate area, for example outside the hall or in a technical room.

This solution reduces noise in the working area and makes maintenance, cleaning and emptying of the dust recovery tank easier.

Key benefits:

• Reduced noise in the powder coating area

• More accessible maintenance

• Possible installation in a technical room

• Easier dust recovery and disposal

• Recommended solution for vertical flow and automatic booths

Integration into a complete line

A powder coating booth can operate independently or be integrated into a complete line with sandblasting, washing, conveying, powder coating and a drying or curing oven.

Equindus supports professionals in choosing the right configuration according to parts, volumes, colour changes, space constraints and desired automation level.

Your powder coating booth with Equindus

Are you looking for a powder coating booth to improve your powder paint application? Equindus supports you in the study, selection and integration of a Eurotherm solution adapted to your activity.

Depending on your needs, we help you define the booth type, extraction system, filtration level, powder recovery and integration into your production line.

FAQ about powder coating booths

Manufacturer website: Eurotherm powder coating booths

Product PDF: Eurotherm powder coating booths brochure