Garage and bodywork equipment
Denjet – CE 20
CE20 is a series of electrical driven high-pressure water-blasters from 200 to 500 Bar and 16 to 38 L/min in flow capacity. The standard machine are with pneumatic rear wheels with parking brake, castor front wheel. The “Slim version” is narrower and has solid rear wheels with parking brake instead. The frames are made up…
Read MoreINGTOP Métal – Service pits for passengers cars JBR 10
SERVICE PIT JBR 10 – PASSENGER CARS Technical description SERVICE PIT DIMENSIONS Width 1.3 m Height 1.5 m Length 8 m Pitch between HEB 140 – U 180 sections – 850 mm Loading capacity – maximal load 10.000 kg Load from axles 4 x 2.500 kg Load from lifting jack for a wheel 4 x…
Read MoreINGTop Métal – Service pits for agricultural and industrial vehicles JBR 30
JBR 30 SERVICE PIT Technical description SERVICE PIT DIMENSIONS Width 1.4 – 1,5 m Height 1.5 m Length 7 – 40 m Pitch between HEB 140 – U 180 sections – 940 mm Loading capacity – maximal load 30.000 kg Load from axles 6 x 5.000 kg Load from lifting jack for a wheel 4…
Read MoreINGTOP Métal – Service pits with an electrically controlled roller shutter JSR 60
SERVICE PIT WITH AN ELECTRICALLY CONTROLLED ROLLER SHUTTER – JSR 60 Technical description SERVICE PIT DIMENSIONS Width 1.4 – 1,5 m Height 1.5 m Length 7 – 40 m Pitch between HEB 140 – U 180 sections – 940 mm Loading capacity – maximal load 30.000 kg Load from axles 6 x 10.000 kg Load…
Read MoreINGTOP Métal – Service pits for military vehicles JBR 60
JBR 60 SERVICE PIT Technical description SERVICE PIT DIMENSIONS Width 1.4 – 1,5 m Height 1.5 m Length 7 – 40 m Pitch between HEB 140 – U 180 sections – 940 mm Loading capacity – maximal load 30.000 kg Load from axles 6 x 5.000 kg Load from lifting jack for a wheel 4…
Read MoreINGTOP Métal – Service pits for Railway vehicles JBR 90
SERVICE PITS FOR RAILWAY VEHICLES – JBR 90 Technical description SERVICE PIT DIMENSIONS Width 1.4 – 1,5 m Height 1.5 m Length 7 – 40 m Pitch between HEB 140 – U 180 sections – 940 mm Loading capacity – maximal load 30.000 kg Load from axles 6 x 5.000 kg Load from lifting jack…
Read MoreINGTOP Métal – Electrically controlled roller shutter
ELECTRICALLY CONTROLLED ROLLER SHUTTER All service pits designated for vehicle service and control are certified by the Engineering Test Institute and they are in concordance with Governmental Decree No. 176/2008 Sb. (Coll.) and Regulation of the European Parliament and the Council No. 2006/42/ES. They are in compliance with requirements on health and safety protection. The…
Read MoreBlackhawk – Lifting systems SUPPORT STANDS
STA2020: Stands 10T AEK833: Ajustable support stand 96486: Roller stands STA15: Support stands for STL3500 STA30: Vehicle stand STA60: Vehicle stand
Read MoreBlackhawk – Lifting systems STL29
Mobile table lift The only equipment that allows the user to move a vehicle on the lift all around the workshop, thanks to the four pivoting wheels and a double cylinder system which retracts the scissors inside the table. The operator can move the car placed on the lift to the different working areas of…
Read MoreBlackhawk – Lifting systems STL50
Electric-hydraulic scissor lift for car body shop Telescopic arms Remote control Lifting by wheels MINIMUM HEIGHT OF THE LIFT: 110 MM Electrical, hydraulic and mechanical safety controls. Suitable for in-floor or above- floor installation. Complete with pre-mounted hydraulic hose enabling the installation of the control unit at max. 5m. All models are available (on request),…
Read More