AR5X-10.15CM Cold Water Pressure Washer 150 bar

AR Professional AR5X-10.15CM — Professional Single-Phase Cold Water High-Pressure Washer

The AR5X-10.15CM is a professional cold water high-pressure washer by Annovi Reverberi, designed for intensive use in workshops, agriculture and on construction sites. With a maximum pressure of 150 bar, a flow rate of 600 l/h and a stainless steel frame, it runs on single-phase 230 V — no three-phase installation required. Available in Luxembourg, Belgium and France through Equindus.

150 bar. 600 l/h. Plug in and clean — on a standard outlet.

The AR5X-10.15CM delivers a working pressure of 120 bar at a flow rate of 600 litres per hour. It is the only machine in the AR5X range to run on single-phase 230 V — meaning it plugs into a standard industrial outlet, with no three-phase installation and no additional electrical work required.

Its 3 kW motor running at 1,450 rpm ensures rapid power build-up and reliable continuous service, even during extended cycles. It effectively covers workshop degreasing, agricultural equipment cleaning and surface preparation prior to treatment.

HRC+VRZ ceramic triplex pump — professional technology

The AR5X-10.15CM is fitted with a ceramic piston triplex pump with a connecting rod-crankshaft system and a nickel-plated brass pump head — the same architecture as the top-of-the-range 15.23CT and 21.23CT models in the series. This design guarantees constant pressure, minimal wear and a service life far exceeding that of the wobble-plate pumps found in consumer-grade machines.

Key pump features:

• Ceramic pistons — resistance to abrasion and chemical agents

• Nickel-plated brass pump head — enhanced protection against detergent products

• Bronze connecting rod — low friction, increased mechanical longevity

• Pressure regulation valve — precise adjustment without dismantling the machine

• High-temperature Viton seals — resistance up to 50 °C, compatible with hot water supply

Stainless steel frame. Stainless steel gauge. Total robustness.

The X suffix in AR5X designates Annovi Reverberi’s stainless steel range. On the AR5X-10.15CM, this translates concretely into a stainless steel protective casing, an integrated Ø63 mm stainless pressure gauge, and a robust frame mounted on Ø300 mm rubber wheels for optimal manoeuvrability on all floor types.

This construction significantly extends the machine’s service life in aggressive environments — permanent humidity, detergent vapours, dust, repeated mechanical impacts.

Stainless construction and mobility:

• Stainless steel protective casing — corrosion resistance, easy to clean

• Integrated stainless Ø63 mm pressure gauge — instant readability, oxidation resistance

• Robust frame with Ø300 mm rubber wheels — easy movement on all floor types

• Inspectable water inlet filter — tool-free maintenance, quick servicing

Delivered with the RLW Hot Series 15 Kit

The AR5X-10.15CM is delivered with Annovi Reverberi’s RLW Hot Series 15 Kit — a complete set of professional accessories compatible with a hot water supply up to 50 °C, ready for immediate use upon receipt.

Standard equipment included:

• High-pressure gun with swivel connector (swivel M22x1.5) — prevents hose twisting

• High-pressure lance M22x1.5 — standard interchangeable connection

• Steel-braided high-pressure hose — resistant to pressure and field abrasion

• Integrated detergent injector — direct suction from an external container

• Pressure regulator — adjustment to surface type and detergent used

Professional applications

Thanks to its single-phase 230 V power supply and wheel-mounted mobility, the AR5X-10.15CM adapts to a wide variety of professional contexts — including sites without three-phase electrical installation.

Recommended sectors of use:

• Garage & bodywork — engine degreasing, chassis, running gear, paint preparation

• Agriculture — farm equipment (tractors, trailers), livestock buildings, utility vehicles

• Trades & SMEs — workshop cleaning, construction equipment, light industrial surfaces

• Construction — formwork, compact machinery, concrete surfaces, facades

• Local authorities — outdoor spaces, municipal vehicles, urban equipment

Technical specifications

• Reference: AR5X-10.15CM — code 15885

• Maximum pressure: 150 bar

• Working pressure: 120 bar (1,740 psi)

• Working flow rate: 600 l/h (158 gph)

• Motor power: 3 hp / 2.2 kW (3 kW in service)

• Rotation speed: 1,450 rpm

• Power supply: 230 V single-phase ~ / 50 Hz

• Maximum water temperature: 50 °C (Viton seals)

• Pump type: Triplex HRC+VRZ — ceramic pistons, nickel-plated brass head

• Structure: Robust frame + stainless steel casing, Ø300 mm wheels

• Kit included: RLW Hot Series 15 Kit

The full AR5X range — Choosing the right model

The AR5X-10.15CM is the entry-level model in the AR5X series — and the only one to run on single-phase 230 V. The other models in the range share the same ceramic triplex architecture and the same stainless steel frame, with higher pressure and flow rates suited to the most intensive applications.

★ Model featured on this page. The only model in the AR5X range running on single-phase 230 V. CT and CTF models require 400 V three-phase power. Contact Equindus for selection advice based on your electrical installation and field requirements.

Your AR5X-10.15CM with Equindus

Are you looking for a professional single-phase 230 V cold water high-pressure washer for your workshop, agricultural operation or trade business in Luxembourg, Belgium or France? Equindus offers the AR5X-10.15CM with selection advice, delivery and after-sales technical support.

Our teams guide you in choosing the accessories suited to your specific applications — rotary nozzles, additional lances, hose reel, detergent kit — so the machine is immediately operational according to your field requirements.

For projects requiring on-site commissioning or installation, our technicians travel to Luxembourg and to the border regions of Belgium and France.

FAQ — AR5X-10.15CM

← Back to high-pressure washers

Manufacturer’s website: Annovi Reverberi — AR Professional

Download the brochure AR5X — AR Professional Steel (PDF)