The Speed One The time saving factor has become the dominating decision reason when procuring a bus washing system. This applies to both private coach companies and public transport companies. The logical, well thought-out, asymmetric wash brush arrangement on the ECOBUS accommodates this trend with an extremely effective washing result. Vehicles that are to be…

Read More

Highlights: • semi-stationary wash • stationary wash • used in short wash halls too   Large fleets require fast and effective washing technology. The big challenge is performing a complete wash on the front, side, roof and rear surfaces of the vehicles in order to minimise operating costs over a short washing time. In order…

Read More

Highlights: • for carrier, industrial and disposal companies • for commercial vehicle wash units • lateral brushes with double bearing • optimal contact pressure of the brushes • special wash programs The TAURUS unit type was developed especially for carrier, industrial and disposal companies, as well as commercial vehicle wash units. Thanks to this unit…

Read More

Highlights: • Mounting kit MAGNUM / TAURUS • Air outlets made from anodised aluminium • Pivoting blower units   The requirements of a modern commercial vehicle wash unit are ever increasing. Years ago, the focus was only on the vehicle wash, whereas nowadays, holistic concepts for the commercial vehicle are required. In addition to a…

Read More

    Highlights: • mounting kit for MAGNUM /MAGNUM-5 and TAURUS • high-pressure device integrated and stationary • oscillating and swivelling • maximum 10 modules per side • power of maximum 80 bar     The perfect addition to the wash system if vehicles with special geometries such as silo trucks and special vehicles have to…

Read More

Blowing dryer Pre-drying blower AEROPRO Front side extension set made from galvanized and painted steel, designed for the basic frame of the drying blower AEROFLEX. An AEROPRO consists of two pivoting pre-drying devices with integrated blowing motor (pivoting sequence through frequency controlled electromotor). The pre-drying devices are additionally equipped with pneumatic air vent flaps for…

Read More

Manual pre-wash zone – Manual pre-wash systems Pre-spray device, manual For application of fly and rim chemicals including a chemical spray lance, storage tank and chemical  injection in the supplied water. Hose guidance via a deck rotary system or wall installation.     FOAM-REX insect foam pre-spray device FOAM-REX insect foam pre-spray device For application…

Read More

AUTOMATIC PRE-WASH ZONE – Pre-spray systems Foam spray device, aluminum premium arch, LED illumination, including program indication Eye-catching entrance portal made from powder-coated aluminum with vehicle and height identification system. Front side covered with translucent, labeled plastic plates. Illuminated system: 1 Lamp compartment in lateral beam, 1 lamp compartment in left and right side beam,…

Read More

Contour cylinders (rocker) Contour wash unit KONTEX-HYBRID, 2 Cylinders, WH 1.100mm A substantial component of the wash tunnel. This unit is used for washing the sill and fender surfaces as well as the lower side surfaces. The frame is made from stainless steel. Side wash height:  1.100 mm.     Contour wash unit MINI-KONTEX-HYBRID, 2…

Read More

Pre-spray device Good weather means wash time and rush hour at the wash tunnel. Hot vehicle surfaces are cooled down before the wash takes place, making the following manual or automatic high-pressure pre-cleaning even more effective. In winter operation, road salt dirt remnants are dissolved. Pre-spray device, aluminum premium arch, LED-illumination, PW 3.550 mm Eye-catching…

Read More